WR-Flex
robust aluminium tensioning-system to make XXL (PVC / banner) tension frames which can be mounted directly on to a wall (LED lit or unlit).
The WR-Flex® system can be used to communicate (advertising) messages via large façades, or adorn or provide existing buildings with a “face-lift”.
Simple mounting by pre-assembled, retractable corner fittings enabling straight cut profiles to be used. Thanks to the intelligent 'slide-in detail', the canvas (on the upper side featuring keder) can be slid smoothly into the tension frame. As such the wording on a message is always straight and large canvasses can be easily and quickly alternated.
In addition to the mill finish version, WR Flex® is also available in a LED White Matt lacquer (RAL 9003) for even and bright illumination. In combination with the use of special light conducting, lightweight rear wall panels (LGP), optimal illumination can be achieved with fewer LED modules.
Specification
Meduim: Printed banner
Usage: Outdoor
Colour: Mill, Anod, white
Parts: 131280 WR-Flex® 140 Tension frame mill 6.10 meter 131281 WR-Flex® 140 Tensionframe LED white 6.10 meter 131290 WR-Flex® Welded corner pieces (4x) 1.00 set4 131282 WR-Flex® Cover with edge mill (upper) 6.10 meter 131283 WR-Flex® Cover with edge (upper-side)anod. 6.10 meter 131284 WR-Flex® Cover mill 6.10 meter 131285 WR-Flex® Cover anodized 6.10 meter 131291 WR-Flex® Set of mitre covers 50 mm (4K) 1.00 set4 131286 WR-Flex® Kederprofile mill 6.10 meter 131276 Keder tensioningprofile mill 6.10 meter 130110 Stretching profile 1.5 mtr mill 1.50 meter 130115 Clamp profile 1.5 mtr mill 1.50 meter 130140 Tension block 100.00 piece 130147 Tension bolt M6x40 INOX 100.00 piece 131288 WR-Flex® Mitred connector set Tensionframe 1.00 piece 131292 WR-Flex®Connector set Tensionframe 1.00 piece 131293 Screw 3,9 x 32 for Cover [131290] 1.00 piece 138650 Keder 7/2 white roll a 250 m. 1.00 meter
Illumination: LED